Skip to Content

Viking Electronics introduces high-efficiency VoIP SIP Paging Horn with multicast

Viking Electronics introduces high-efficiency VoIP SIP Paging Horn with multicast

HUDSON, Wis.—Viking Electronics, a manufacturer of more than 500 security and communications products, has announced the release of the 300-IP SIP Paging Horn, designed for voice paging via SIP and multicast. It also allows for background music, mass notification tones, and messages via multicast.

“The 300-IP is extremely efficient comparing amplitude to power requirements,” said Paul Speltz, Engineer, Viking Electronics Inc. “With full SIP and multicast paging compatibility, this is a great product.”

The 300-IP registers as a third-party SIP endpoint device to a hosted or local VoIP SIP phone system. The paging horn can automatically answer inbound calls and allow paging through the unit. The same horn can also be assigned to as many as 10 multicast groups which allows it to receive prioritized pages. The 300-IP is PoE powered, and the built-in class D amplifier is capable of driving audio through the horn at up to 113 dB SPL.

Viking’s model RC-4A is able to sync with the 300-IP to provide relay closure capabilities for door strike, paging, loud ringing, and ring-flash modes.

For outdoor installations where the unit is exposed to precipitation or condensation, the 300-IP is available with Enhanced Weather Protection (EWP) and designed to meet IP66 standards.

For more information on the 300-IP, visit:  https://vikingelectronics.com/products/300-ip/

Comments

To comment on this post, please log in to your account or set up an account now.